Flat tires never happen at a convenient time, but you can handle the situation confidently if you know exactly what to do. Instead of waiting helplessly on the side of the road, follow these clear, step-by-step instructions to change your car tire safely and efficiently. If you need help with a flat tire in Charleston, know that you can rely on the friendly experts at CAP Towing.
Safety First
First, find a safe location. As soon as you notice the flat, slow down and pull over to a flat, stable surface away from traffic. Turn on your hazard lights immediately so other drivers can see you. Apply the parking brake to keep your vehicle from rolling.
Ensure You Have The Proper Equipment
Next, gather your tools. You’ll need a spare tire, a jack, and a lug wrench—these usually come with your vehicle. Before lifting the car, use the lug wrench to loosen the lug nuts on the flat tire. Turn them counterclockwise, but don’t remove them completely yet. This step becomes much easier while the tire still touches the ground.
Time to Lift Your Car
Now position the jack under the vehicle’s designated lift point, which you can find in your owner’s manual. Raise the car until the flat tire sits a few inches off the ground. Once elevated, remove the loosened lug nuts completely and take off the flat tire.
Place the spare tire onto the wheel hub, aligning the holes carefully. Push it into place, then hand-tighten the lug nuts. After that, use the wrench to tighten them further in a crisscross pattern. This method ensures even pressure and keeps the wheel secure.
Lower the car back to the ground using the jack. Once the vehicle rests fully on the ground, tighten the lug nuts firmly again. Don’t rush this step proper tightening keeps you safe on the road.
Remember, if you have a flat tire in Charleston and you need assistance just call us 843-900-1231 The friendly experts at CAP Towing are here to assist you 7 days a week, 365 days a year.
